Xerox 6100BD - Phaser Color Laser Printer Aan de slag handleiding - Pagina 22

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 34 pagina's. Disk overwrite installation and usage
Ook voor Xerox 6100BD - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (32 pagina's), Brochure & specificaties (4 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Installatiehandleiding (2 pagina's), Release Release (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (11 pagina's), Installatie- en bedieningshandleiding (8 pagina's)

Pagina afdrukken

Xerox 6100BD - Phaser Color Laser Printer Aan de slag handleiding

Caveat

PPML resource location is not restored in

Preferences menu after a Configuration

Restore. You must reenter the location

manually.

The NetWare and AppleTalk Gateway

settings are not restored in the UI after a

Configuration Restore. You must reset the

gateway manually.

Data Overwrite aborts due to insufficient

storage space.

Avoidance: Backup saved jobs and/or

resources to a network repository. When Data

Overwrite is run, be sure to select [Overwrite

Saved Jobs and Resources]. When the Data

Overwrite is complete, restore the saved jobs

and resources from the network.

The Plex FAB summary display may not

refresh.

Solution: Select the FAB. The values will

display on the FAB.

If COLLATE=NO is set in the JDE, the job

does not offset as expected. Check the job

output.

A job programmed with back covers and a

different stock for the covers prints with the

back covers on the stock of the main body of

the job.

The Add to tray button is disabled in the Stock

Properties dialog for the stocks MAIN, AUX,

and AUTO. Use the Add to tray button in the

Stock Library right mouse menu instead.

After a DocuSP restart, selecting Setup,

SSL/TLS causes the window to not be closed

using the mouse. Close the window using the

keyboard Tab button.

The Job ID for an online job is not displayed

on the DocuSP UI.

The system is in power saver mode and does

not automatically exit power saver mode

when a job is submitted. Manually exit power

saver mode. Setting the system power saver

mode to a longer time or disabling the power

saver can prevent the problem if desired.

Applicable printer product

All

All monochrome printers

All monochrome printers.

All monochrome printers