Xerox 6180N - Phaser Color Laser Printer Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 28 pagina's. Color laser printer
Ook voor Xerox 6180N - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Handleiding voor beoordelaars (16 pagina's), Specificaties (4 pagina's)

Xerox 6180N - Phaser Color Laser Printer Gebruikershandleiding

Hardware and software requirements

Hardware

Software

Xerox DocuSP IPDS User Guide

2 Installation and setup

The requirements and instructions for installing the DocuSP IPDS
software and setting up the printing environment are described in this
chapter. Review this entire chapter before proceeding with the
installation.
Some setup tasks are performed on the DocuSP window and some
are performed on the DocuSP IPDS window. The main installation
and setup tasks are:
Licensing and configuring the software and features
Defining the DocuSP IPDS queue
Setting up media
Loading IBM AFP resident outline fonts
Defining a logical printer
Verifying the installation
The following hardware and software is required to install DocuSP
IPDS.
The DocuSP IPDS software will run on a SunBlade 1000 or higher
based Digital Front End (DFE) printer controller that supports
DocuSP.
DocuSP, version 4.2 or higher.
If your DocuSP IPDS configuration requires a channel connection,
you will need an online channel board. Contact your local Xerox
representative for more information.
2-1