Xerox 6180N - Phaser Color Laser Printer Handmatig - Pagina 27

Blader online of download pdf Handmatig voor {categorie_naam} Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 34 pagina's. Color laser printer
Ook voor Xerox 6180N - Phaser Color Laser Printer: Installatiehandleiding (34 pagina's), Specificatieblad (2 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (28 pagina's), Installatiehandleiding (2 pagina's), Beveiligingshandleiding (38 pagina's), Release Release (2 pagina's), Installatiehandleiding (2 pagina's), Aan de slag handleiding (37 pagina's), Handmatig (34 pagina's), Aan de slag handleiding (34 pagina's), Gebruikershandleiding (32 pagina's), Installatie- en bedieningshandleiding (8 pagina's), Handleiding voor beoordelaars (16 pagina's), Specificaties (4 pagina's)

DocuColor 2045/2060, DocuColor 6060, and DocuColor iGen3 specific changes

DocuSP 3.6 to 3.7 Differences Document

¨ Three different versions for color rendering are now

available. At installation, the customer has the option to add

version 1.0, 1.1, or 2.0. Each of these options includes the

full content of the previous version.

¨ Customers upgrading to DocuSP 3.7x will receive all of the

color version kits. Within each kit, the customer letter

contains sample documents showing the color output for

each version. New installations will receive only the 2.0

version.

¨ Prior to an upgrade, if a customer has one or more jobs that

need to remain set at a previous color version, the jobs

should be saved in the Fast Reprint Format, FRF. This will

preserve the color of a legacy job.

Note that the DocuColor iGen3 only supports version 1.0 and

2.0.

¨ This applies to DocuColor iGen3 only at this time.

¨ Page Parallel RIP allows the DocuSP to decompose (RIP)

multiple jobs or multiple segments of a single job

simultaneously, resulting in a large boost in RIP speed.

¨ This feature is supported for PostScript, PDF, VIPP, and

ASCII formats only.

¨ The Page Parallel RIP feature can be found in System

Preferences on the Job Processing tab. For assistance in

using the feature, refer to the recommendations shown in the

preferences window and in the on-line help.