Xerox FreeFlow Beveiligingshandleiding - Pagina 30

Blader online of download pdf Beveiligingshandleiding voor {categorie_naam} Xerox FreeFlow. Xerox FreeFlow 38 pagina's. For color 560/570 printer
Ook voor Xerox FreeFlow: Installatiehandleiding (34 pagina's), Brochure (2 pagina's), Release Release (23 pagina's), Installatiehandleiding (2 pagina's), Release Release (33 pagina's), Belangrijke installatie-informatie (2 pagina's), Gebruikershandleiding (50 pagina's), Handmatig (18 pagina's), Quick Connect handleiding (2 pagina's), Handboek met procedures voor vervoerders (28 pagina's)

Pagina afdrukken
Xerox FreeFlow Beveiligingshandleiding
Using an Existing Signed Certificate from a Certificate Authority
26
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
–
Click on the 'Enable SSL/TLS' checkbox at the top of the SSL/
TLS window.
–
Select a SSL/TLS mode of operation:
•
Normal (Encrypted and Unencrypted Access)
•
Secure (Encrypted Access Only)
–
Select encryption strength:
•
Normal (DES-MD5-56-bit)
•
Normal (DES-MD5-40-bit)
•
Normal (DES-MD5-128-bit)
•
Normal (3DES-MD5-128bit)
•
High (RC4-MD5-128-bit)
•
High (3DES-MD5-128-bit)
–
If SSL/TLS is not already enabled
–
Click 'Add Certificate'
Step 1 - Select "Signed Certificate from a Certificate Authority"
Step 2 - Select and enter either the server
•
Domain Name
•
IP Address
•
Other
Step 3 - Enter the requested information:
•
Organization (required)
•
Organizational Unit (optional)
•
E-mail (optional)
•
Locality (optional)
•
State/Province (optional)
•
Country (required)
Step 4 - Browse to the location of the signed certificate (.pem
file).
Step 5 - Verify information entered in previous steps.
Step 6 - A message will appear indicating that the certificate
has been installed.
NOTE: During steps 2-5, the user may go back and correct any
mistakes made in previous steps.
Security Guide