Xerox Nuvera 100 Aanvullende handleiding - Pagina 33

Blader online of download pdf Aanvullende handleiding voor {categorie_naam} Xerox Nuvera 100. Xerox Nuvera 100 48 pagina's. Production system
Ook voor Xerox Nuvera 100: Specificatieblad (2 pagina's), Functies Handleiding (34 pagina's), Handleiding voor planning (22 pagina's), Gebruikershandleiding (40 pagina's), Bedieningshandleiding (34 pagina's), Referentiehandleiding (2 pagina's), Handleiding voor planning (20 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Installatiehandleiding (2 pagina's), Handleiding voor planning (38 pagina's), Handleiding voor planning (16 pagina's), Referentiehandleiding (2 pagina's), Specificaties (2 pagina's), Hints en tips handleiding (18 pagina's), Hints en tips handleiding (18 pagina's), Aan de slag handleiding (26 pagina's), Aan de slag handleiding (30 pagina's)

Tape Client Job Submission Guide

Managing and printing jobs from the Tape Client

1. Obtain the initial JDL, JDE, and (if required) form names if

you do not already know them. These resource files must be

stored in the "lcds" folder on the printing system internal disk

before they can be used for a print job.

If the resources that you need are not present in the "lcds"

folder, you can create them using PDL or a forms creation

software package such as Elixir. You can also import the

LCDS resources from diskette, tape, CD-ROM, or other

folders in the UNIX file system where they may be stored.

(Refer to "Importing resource files," earlier in this chapter for

the procedure.)

2. Open the Tape Client window.

3. In the Document Group box, click Initial JDL..., Initial JDE...,

or Initial Form.... The resource library window opens for the

initial resource that you selected.

Figure 2-6. Document field on Tape Client window

Resource library windows display a list of all resource files of

a selected type that are stored in the "lcds" folder on the

controller disk. The following figure shows the JDL window.

2-9