Xerox Nuvera 100 Hints en tips handleiding - Pagina 12

Blader online of download pdf Hints en tips handleiding voor {categorie_naam} Xerox Nuvera 100. Xerox Nuvera 100 18 pagina's. Production system
Ook voor Xerox Nuvera 100: Specificatieblad (2 pagina's), Functies Handleiding (34 pagina's), Handleiding voor planning (22 pagina's), Gebruikershandleiding (40 pagina's), Bedieningshandleiding (34 pagina's), Referentiehandleiding (2 pagina's), Handleiding voor planning (20 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Installatiehandleiding (2 pagina's), Aanvullende handleiding (48 pagina's), Handleiding voor planning (38 pagina's), Handleiding voor planning (16 pagina's), Referentiehandleiding (2 pagina's), Specificaties (2 pagina's), Hints en tips handleiding (18 pagina's), Aan de slag handleiding (26 pagina's), Aan de slag handleiding (30 pagina's)

Release Issues

Xerox Nuvera

Issues remaining from previous release

Description

When 'After Every Tray Cycle' tray confirmation is enabled, and a tray is cycled, all tray

programming, except for Stock Size, in the pop-up confirmation window is set to default.

Workaround

If you are using named stock or stock weight different than the queue default weight then it is

recommended that you set [System Preferences -> Stocks and Trays -> Tray Confirmation] to

'None'. If you do not, then each time the tray confirmation pop-up window opens all the

values will be set to the queue default values.

Description

11x17 and 8 1/2x14 build jobs are printing with second segment as 8.5x11 instead of 11x17.

Workaround

When using Build Job, please leave the paper selection set to APS before entering Build Job.

Once you are in Build Job you can change the paper selection to any stock you wish. You also

can leave it set to APS.

Description

Books printed on 60gsm paper that have heavy (90gsm and higher) inserts can cause last

several pages in the book to be skewed.

Workaround

Recommend using inserts less than 90gsm when body is 60gsm.

Description

Do not use Annotation when feeding from the short edge feed tray and selecting the 180

degree rotate. The annotation will be upside-down.

Workaround

None.

3-2

Hints and Tips Guide