Xerox Nuvera 100 Aan de slag handleiding - Pagina 12

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Xerox Nuvera 100. Xerox Nuvera 100 30 pagina's. Production system
Ook voor Xerox Nuvera 100: Specificatieblad (2 pagina's), Functies Handleiding (34 pagina's), Handleiding voor planning (22 pagina's), Gebruikershandleiding (40 pagina's), Bedieningshandleiding (34 pagina's), Referentiehandleiding (2 pagina's), Handleiding voor planning (20 pagina's), Referentiehandleiding (42 pagina's), Snelle referentie (2 pagina's), Installatiehandleiding (2 pagina's), Aanvullende handleiding (48 pagina's), Handleiding voor planning (38 pagina's), Handleiding voor planning (16 pagina's), Referentiehandleiding (2 pagina's), Specificaties (2 pagina's), Hints en tips handleiding (18 pagina's), Hints en tips handleiding (18 pagina's), Aan de slag handleiding (26 pagina's)

Safety and Notices

Laser Safety

This product complies with safety standards and is certified as a Class 1 Laser product under

the Center for Devices and Radiological Health (CDRH) of the United States Food and Drug

Administration (FDA) implemented regulations for laser products. This product complies with

FDA performance standards for laser products except for deviations pursuant to Laser Notice

No. 50, dated June 24, 2007. These regulations apply to laser products marketed in the United

States. The label on the machine indicates compliance with CDRH regulations and must be

attached to laser products marketed in the United States. This product does not emit

hazardous laser radiation.

WARNING

Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous exposure of laser light.

Since radiation emitted inside this product is completely confined within the protective

housing and external covers, the laser beam cannot escape from the machine during any

phase of the user operation.

This product contains laser-warning labels. These labels are intended for use by the Xerox

Service Representative and are placed on or near panels or shields that require special tools for

removal. Do not remove any of the panels. There are no operator serviceable areas in these

covers.

This product complies with IEC's safety standard 60825-1 (Edition 1.2) issued August 2001.

The equipment complies with laser product performance standards set by governmental,

national, and international agencies as a Class 1 Laser Product. It does not emit hazardous

radiation, as the beam is totally enclosed during all phases of customer operation and

maintenance.

WARNING

Use of controls or adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

This product contains laser-warning labels. These labels are intended for use by the Xerox

Service Representative and are placed on or near panels or shields that require special tools for

removal. Do not remove any of the panels. There are no operator serviceable areas inside

these covers.

If you need additional safety information concerning the product or Xerox supplied materials,

you may call the following number:

+44 (0) 1707 353434

xii

Xerox Nuvera

Getting Started Guide