Xerox Nuvera 100 MX Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Xerox Nuvera 100 MX. Xerox Nuvera 100 MX 32 pagina's. Production system and digital production press, production media cart, perfecting production system
Ook voor Xerox Nuvera 100 MX: Brochure (4 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (36 pagina's), Gebruikershandleiding (24 pagina's)
Pagina afdrukken
6
your CD are listed:
•
600 dpi CD: E13B, E13B9, and CMC72510 are listed.
•
300 dpi CD: E13B and CMC72510
NOTE: The DocuPrint 75 EPS does not support the CMC7 fonts.
For these systems, select only E13B and E13B9 (if available).
e. Highlight the required fonts, and click Install. A Question
window tells you that loading the fonts from CD could take
over 30 minutes. Click OK.
Watch the lower-left corner of the window. The "Installing
Fonts...Done" message is displayed briefly.
f.
Close the Install Postscript Soft Fonts window by clicking
Close.
g. If you do not intend to install any more fonts, click the
green triangle icon to eject the CD.
NOTE: The PostScript fonts are available only after the system is
restarted.
6. If PCL MICR fonts are needed, follow these steps:
a. With the MICR Fonts CD still in the CD drive, select PCL
Cartridge from the Font Type pull-down menu.
b. Click Load.... The Install PCL Cartridge Fonts window
opens.
c. In the Look In... pull-down menu, select DOS CD-RW 0.
d. Click List Fonts. In the Files section, the following PCL
fonts are listed:
•
E13B-P (300 dpi font)
•
E13B (600 dpi font)
•
CMC72510
•
68W
e. Highlight the required fonts, and click Install. The "Installing
Fonts...Done" message is displayed briefly in the lower-left
corner of the Install PCL Cartridge Fonts window.
f.
If you do not intend to install the LCDS fonts, click the
green triangle icon to eject the CD.
g. Click Close on the Import PCL Cartridge Fonts window,
then OK.
7. Restart the system to make all fonts available.
MICR User Guide