eControls Comfort365 C365T21 Installateur en gebruikershandleiding - Pagina 12

Blader online of download pdf Installateur en gebruikershandleiding voor {categorie_naam} eControls Comfort365 C365T21. eControls Comfort365 C365T21 13 pagina's.
Ook voor eControls Comfort365 C365T21: Gebruikershandleiding (4 pagina's), Installateur en gebruikershandleiding (13 pagina's)

Pagina afdrukken

USER OPTIONS (Cont.)

Clean the Touch Screen

This option disables the touch screen for 30

seconds to enable the user to clean the touch

screen by wiping down with a soft, damp cloth.

Touch the MENU key

to display CLEAN

DISPLAY option

indicated by CL. To

exit this option, press

NEXT.

ENTER

Press ENTER to start

the 30 second count

down. The touch

OFF

screen is disabled

during this time.

INSTALL / REPLACE AA BATTERIES

Two AA batteries power

the clock when 24VAC

power is lost. Slide the

battery cover downward

and install the two AA

batteries, paying

attention to the polarity.

HELPFUL HINTS FOR

HOMEOWNERS

What are common settings for my

thermostat?

Many homeowners run their thermostat in

the HOLD mode. Set the HOLD mode by

touching the MODE key until HOLD is

displayed. Now select the SYSTEM mode

and adjust your set point. In COOL the

thermostat will turn on cooling when the

room temperature is at or above the set

point temperature. In HEAT the thermostat

will turn on heating when the room

temperature is at or below the set point

temperature.

If your household follows a set schedule,

the SCHEDULE mode can be selecting by

touching the MODE key until SCHEDULE is

displayed. The thermostat will now follow

the default schedule or a custom schedule

set by the homeowner.

Warranty

This thermostat is warranted to be free of defects due to workmanship

or materials under normal use and service for a period of 5 years from

date of installation and not longer than 6 years from manufacturing

date code.

HOMEOWNER SECTION

HELPFUL HINTS FOR HOMEOWNERS (Cont)

Does the Comfort365 have any

energy saving features?

One of the biggest energy saving features

is the Nighttime Airflow Control option

which can save 30% in energy at night. This

option is defaulted to On and is ideal when

all of the bedrooms are located upstairs.

This option uses the temperature sensors in

the sleeping area to make heating and

cooling calls. In addition, the thermostat

automatically directs 130% more airflow to

the sleeping space and 30% less airflow to

the unoccupied living space.

How do I display the sleeping

space temperature?

Touch the area where Living and the room

temperature is displayed. The thermostat

will now display the sleeping space

temperature. Touch the area again to

display the living space temperature.

If the sleeping space temperature is

unusually low or high, contact your installer.

The wrong type of sensors may have been

installed or the sensors may have been

wired incorrectly.

Note: If Nighttime Airflow Control option is

On, the thermostat will automatically

display the sleeping temperature at the

Night start time.

My airflow doesn't seem to be

working properly.

Test the airflow by overriding the airflow

(See next section). Increase the airflow to

the sleeping space to the maximum. You

should feel more airflow coming from the

registers in the sleeping space compared to

the registers in the living space. Now

increase the airflow to the living space to

the maximum. You should feel more

airflow coming from the registers in the

living space compared to the registers in

the sleeping space.

If you do not get these results, contact your

installer.

How do I direct more airflow to

the downstairs living space or

upstairs sleeping space.

The thermostat automatically controls

airflow to the living and sleeping space.

However, the thermostat includes options to

allow the homeowner to direct more airflow

to either the living space or the sleeping

space.

Override Airflow for 3 Hours

Touch the Airflow % area. The set point

disappears. Use the UP key to increase

airflow to the sleeping space or the DOWN

key to increase airflow to the living space.

To end airflow override, touch the Airflow %

area, then touch the MODE key.

Override Airflow Permanently (Manual

Control)

Touch the MENU key twice to display the

AAC option. This option, Automatic Airflow

Control, defaults to On. Turn OFF by

touching the DOWN key. Manually change

the airflow by touching the Airflow % area

and using the UP or DOWN key to direct

airflow to the living or sleeping space. The

airflow % will remain until the homeowner

makes an adjustment.

Note: If Nighttime Airflow Control is On, at

the morning start time when Nighttime

Airflow Control ends, the airflow % will

change to 100%. This prompts the

homeowner to evaluate the airflow needs

for that day.

Learn more about your Comfort365

Thermostat by watching the Consumer

How-To Video available at

Comfort365USA.com

eControls, Inc. 26072 Merit Circle #110 / Laguna Hills, CA 92653

949-916-0945 Fax 949-458-8502 www.eControlsUSA.com

eControls