Yamaha YZF690-U 2022 Servicehandleiding - Pagina 13

Blader online of download pdf Servicehandleiding voor {categorie_naam} Yamaha YZF690-U 2022. Yamaha YZF690-U 2022 18 pagina's.

Pagina afdrukken

TIP

The tripmeters will reset and continue counting

after 9999.9 is reached.

Fuel reserve tripmeter

If the last segment of the fuel meter starts flash-

ing, the display automatically changes to the fuel

reserve tripmeter "TRIP F" and starts counting

the distance traveled from that point.

To reset the fuel reserve tripmeter, change the

display to the fuel reserve tripmeter, and then

hold the "RES" switch until it is reset.

TIP

If you do not reset the fuel reserve tripmeter

manually, it will reset automatically and disap-

pear from the display after refueling and travel-

ing 5 km (3 mi).

Instantaneous fuel consumption display

1. Instantaneous fuel consumption display

This display shows the fuel consumption under

the current riding conditions. It can be set to ei-

ther "km/L" or "L/100 km", or "MPG" when using

miles. To switch the fuel consumption measure-

ment units, hold the "SEL" switch until the mea-

surement units change.

• "km/L": the distance that can be traveled on 1.0

L of fuel.

• "L/100 km": the amount of fuel necessary to

travel 100 km.

• "MPG": the distance that can be traveled on

1.0 Imp.gal of fuel.

TIP

When traveling under 10 km/h (6 mi/h), "– –.–" is

displayed.

TIP

The instantaneous fuel consumption function

should be used for general reference only. Do

not use this figure to estimate the distance that

can be traveled on the current tank of fuel.

Average fuel consumption display

1. Average fuel consumption display

This display shows the average fuel consump-

tion since it was last reset. The average fuel con-

sumption display can be set to either "AVE_ _._

km/L" or "AVE_ _._ L/100 km", or "AVE_ _._

MPG" when using miles. To switch the fuel con-

sumption measurement units, hold the "SEL"

switch until the measurement units change.

• "AVE_ _._ km/L": the average distance that

can be traveled on 1.0 L of fuel.

• "AVE_ _._ L/100 km": the average amount of

fuel necessary to travel 100 km.

• "AVE_ _._ MPG": the average distance that

can be traveled on 1.0 Imp.gal of fuel.

TIP

• To reset the display, change the display to the

average fuel consumption display, and hold

the "RES" switch until it is reset.

• After resetting, "– –.–" is shown until the vehicle

has traveled some distance.

Coolant temperature display

1. Coolant temperature display

1-4

FEATURES