Yamaha 141 Gebruikershandleiding - Pagina 33

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha 141. Yamaha 141 40 pagina's. Owner's manual
Ook voor Yamaha 141: Beknopte handleiding (2 pagina's)

Pagina afdrukken

Keyboard Stand Assembly

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance

with the sequence given below.

• Assembly should be carried out by at least two persons.

• Assemble the stand on a hard and flat floor with ample space.

• Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Use of

incorrect screws can cause damage or malfunction of the product.

• Be sure to tighten up all screws upon completing assembly of each unit.

• To disassemble, reverse the assembly sequence given below.

Have a Phillips-head (+) screwdriver ready

Remove all parts from the package and make sure you

have all of the items.

Bundled pedal cord

inside

Assembly Parts

6 × 20 mm long screws × 4

6 ×16 mm short screws × 4

4 ×12 mm thin screws ×2

Headphone hanger set (YDP-161 only)

4 ×10 mm thin screws × 2

AC Power cord (YDP-161)

AC Power adaptor (YDP-141)

4 × 20 mm tapping screws ×4

Cord holders × 2

Headphone hanger

Attach (finger-tighten) C to D and E.

1-2

1-3

1-1 Untie and straighten out the bundled pedal cord.

Don't discard the vinyl tie. You will need it later in

step 6.

1-2 Align D and E with each end of C.

1-3 Attach D and E to C by finger-tightening the long

screws

(6 × 20mm).

YDP-161/141 Owner's Manual

1-1