Yamaha ARIUS YDP-S35 Gebruikershandleiding - Pagina 28
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha ARIUS YDP-S35. Yamaha ARIUS YDP-S35 48 pagina's.
Ook voor Yamaha ARIUS YDP-S35: Beknopte handleiding (2 pagina's), Midi-referentie (4 pagina's)
Pagina afdrukken
Recording Your Performance
This instrument lets you record your keyboard performance as the User Song. Up to two Parts (left-hand and
right-hand) can be recorded separately.
Recording Your Performance
1.
Select the desired Voice and other parameters, such as beat
(time signature), for recording.
For instructions on selecting a Voice, refer to page 20. If necessary, set other
parameters, such as beat (time signature) and effects, in this step.
2.
Engage the Record Ready mode.
Quick Recording
Press [REC] to engage the Record Ready mode. Your keyboard performance will be
automatically recorded to the right-hand Part even if you play with both your right
and left hands. Note that the already-recorded data of the right- and left-hand parts
will be erased by Quick Recording.
Recording to individual parts
While holding down [REC], press [+R] or [−L] to engage the Record Ready mode
for the Part you want to record.
To record the right-hand Part ([+R])
If data has already been recorded to the other Part, the data in this Part will be
played back while recording.
To turn the Part off or on, press the appropriate part button ([+R] or [−L]) while
holding down [PLAY].
To exit from Record Ready mode:
Simply press [REC].
3.
Play the keyboard or press [PLAY] to start recording.
The [REC] lamp lights up while the Recording Part lamp flashes at the current
tempo.
4.
Press either [REC] or [PLAY] to stop recording.
The [REC], [PLAY], [+R] and [−L] lamps flash, indicating that the recorded data is
being stored. After the Save operation is completed, the lamps will turn off,
indicating that the Record operation has been completed.
5.
To hear the recorded Song, press [PLAY] to start playback.
Press [PLAY] again to stop playback.
To record to the other part
Repeat the steps above. In step 2, follow the instructions of "Recording individual
parts."
28
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner's Manual
To record the left-hand Part ([−L])
NOTICE
Only one Song (2 tracks) can
be recorded to this
instrument.
Note that recording your
performance to a part
containing data will replace
already-recorded data with
the new data.
NOTE
• The "Smart Pianist" app
(page 8) enables you to
record your keyboard
performance as MIDI/audio
data and save it on your
smart device.
• You can use the Metronome
while recording; however, the
Metronome sound will not be
recorded.
• If the keyboard is in the Duo
mode (page 25), the data
will be recorded to each
Part. The Part for recording
cannot be specified.
• If the data capacity of the
instrument approaches full
when you engage Record
Ready mode, the [REC] and
[PLAY] lamps flash quickly
for about three seconds.
NOTICE
Never turn off the power
while the recorded data is
being stored (while the
lamps are flashing).
Otherwise, all recorded data
will be lost.
Recording Capacity
This instrument can record up
to 100 KB (approximately
11,000 notes).