Yamaha Clavinova CVP-309 Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Yamaha Clavinova CVP-309. Yamaha Clavinova CVP-309 15 pagina's. Accessory cd-rom for windows

Pagina afdrukken

Troubleshooting

The driver cannot be installed.

• Is the USB cable connected correctly?

→ Check the USB cable connection.

→ Disconnect the USB cable, then connect it again.

• Is the USB function enabled on your computer?

→ When you connect the instrument to the computer for the ﬁrst time,

if the "Add New Hardware Wizard" does not appear, the USB

function on the computer may be disabled. Perform the following

steps.

1 Select [Control Panel] → [System] → [Device Manager] (for

Windows 98/Me), or select [Control Panel]* → [System] →

[Hardware] → [Device Manager] (for Windows 2000/XP).

* Classic View only in Windows XP.

2 Make sure that no "!" or "x" marks appear at "Universal serial

bus controller" or "USB Root Hub." If you see an "!" or "x" mark,

the USB controller is disabled.

• Is any unknown device registered?

→ If driver installation fails, the instrument will be marked as an

"Unknown device," and you will not be able to install the driver.

Delete the "Unknown device" by following the steps below.

1 Select [Control Panel] → [System] → [Device Manager] (for

Windows 98/Me), or select [Control Panel]* → [System] →

[Hardware] → [Device Manager] (for Windows 2000/XP).

* Classic View only in Windows XP.

2 Look for "Other devices" in the menu "View devices by type."

3 If you ﬁnd "Other devices," double-click it to extend the tree to

look for "Unknown device." If one appears, select it and click the

[Remove] button.

4 Remove the USB cable from the instrument, and make the

connection again.

5 Install the driver again.

→ Windows 98/Me users........ see page 6

→ Windows 2000 users........... see page 6

→ Windows XP users.............. see page 6

When controlling the instrument from your computer via USB,

the instrument does not operate correctly or no sound is

heard.

• Did you install the driver?

• Is the USB cable connected correctly?

• Are the volume settings of the instrument, playback device, and

application program set to the appropriate levels?

• Have you selected an appropriate port in the sequence software?

• On the Clavinova, check whether the Piano Lock is engaged or not.

Playback response is delayed.

• Does your computer satisfy the system requirements?

• Is any other application or device driver running?

Cannot suspend or resume the computer correctly.

• Do not suspend the computer while the MIDI application is running.

• If you are using Windows 2000, you may not be able to suspend/resume

normally, depending on the particular environment (USB Host

Controller, etc.). Even so, simply disconnecting and connecting the USB

cable will allow you to use the instrument functions again.

How can I delete or re-install the driver?

Windows Me/98

1 When the instrument is recognized correctly, double-click "System" in

the Control Panel to open the System window.

2 Double-click the "Device Manager" tab, then select "YAMAHA USB

MIDI Driver" and delete it.

3 Use the MS-DOS prompt or Explorer to delete the following three ﬁles.

To delete these ﬁles using Explorer, select "Folder Options" from the Tool

(View) menu, and select "Show all ﬁles (and folders)."

• \WINDOWS\INF\OTHER\YAMAHA***.INF

• \WINDOWS\SYSTEM\Xgusb.drv

• \WINDOWS\SYSTEM\Ymidusb.sys

4 Disconnect the USB cable.

5 Restart the computer.

6 Re-install the driver.

Accessory CD-ROM for Windows Installation Guide