Yamaha disklavier Mark III Series Bedieningshandleiding - Pagina 34
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Yamaha disklavier Mark III Series. Yamaha disklavier Mark III Series 49 pagina's. Playback models
Ook voor Yamaha disklavier Mark III Series: Onderhoudshandboek (50 pagina's), Brochure & specificaties (20 pagina's), Geavanceerde bedieningshandleiding (39 pagina's)
Pagina afdrukken
Changing the Tempo
You can speed up or slow down the playback
tempo. Slowing down the playback tempo can be
useful when practicing a difficult piano part.
These tempo settings remain in effect until the
disk is ejected or the Disklavier is turned off.
To change the tempo, use one of the following
options:
a
On the Control Unit, press the
Selector until the TEMPO indicator
lights. Then, press [+/YES] to
increase or [–/NO] to decrease the
tempo.
VOLUME
TEMPO
TRANSPOSE
BALANCE
Playback tempo can be adjusted from –50%
to +20% in 1% increments.
b
On the remote control, use the
[TEMPO] buttons to adjust the
tempo.
TEMPO
–
Remote Control
[–] decreases the tempo, and [+] increases
the tempo. [0] resets the tempo to 00%.
Once the tempo has been changed, the new
tempo value is shown continuously on the
display.
22
–/NO
+/YES
Flashes
+
0
Transposing a Song
Playback can be transposed up or down by up to
two octaves. This is useful, for example, when
you want to sing along (karaoke) in a different
key from the original recording.
Transposition changes remain in effect until the
disk is ejected or the Disklavier is turned off.
To transpose a song, use one of the following
options:
a
On the Control Unit, press the
Selector until the TRANSPOSE
indicator lights. Then, press
[+/YES] to increase or [–/NO] to
decrease the transposition value.
VOLUME
TEMPO
TRANSPOSE
BALANCE
Flashes
Playback can be transposed in half-step
increments up or down two octaves (–24 to
+24).
b
On the remote control, use the
[TRANSPOSE] buttons.
TRANSPOSE
–
Remote Control
[–] decreases the transposition value, and
[+] increases the transposition value.
[0] resets the transposition value to 00.
Once transposed, the transposition value is
shown continuously on the display.
–/NO
+/YES
+
0