Yamaha Disklavier Mark III series DGC1B Geavanceerde bedieningshandleiding - Pagina 15
Blader online of download pdf Geavanceerde bedieningshandleiding voor {categorie_naam} Yamaha Disklavier Mark III series DGC1B. Yamaha Disklavier Mark III series DGC1B 39 pagina's. Dgc1b
Pagina afdrukken
In the above display, "A" is selected.
Therefore, playback begins from disk A and
continues to the end of disk F, then stops.
Disks are played back from left to right in
the display. The chain will not repeat
unless the "All Repeat" setting is made (see
Chapter 7 "Repeat Playback" in the Basic
Operation Manual for details). Disks
represented by "x" and "_" are skipped.
3
Press [PLAY/PAUSE] to begin
Chain Play from the specified disk.
You can also press [ENTER] or [STOP] to
engage Standby mode.
When playback of the last song on the
selected disk finishes, the next disk in the
group that contains songs is automatically
played back.
Canceling Group
Functions
You can choose to manage your disks in disk units
instead of group units by setting Memory Disk
Chain Play to OFF and selecting a target disk in
the Memory Disk selection display. For example,
if you want to play disk 7 only, you should set
Memory Disk Chain Play to OFF, and select disk
7 using the [SELECT] buttons.
1
Hold down [FUNC.] and press
[STANDBY / ON].
The setup menu appears.
2
Press [>] to move the c cursor to
the Chain Play option, then press
[ENTER].
A display similar to the following appears.
3
Press [–/NO] or [+/YES] until OFF
appears.
4
Press [ENTER].
The group is switched off, and the display
returns to the setup menu.
11