Yamaha DM 2000 Version 2 Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 22 pagina's. Version 2
Ook voor Yamaha DM 2000 Version 2: Gebruikershandleiding (44 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (14 pagina's), Software-installatiehandleiding (13 pagina's), Gebruikershandleiding (1 pagina's), Aanvullende handleiding (4 pagina's), Gebruikershandleiding (37 pagina's), Installatiehandleiding (35 pagina's), Oriëntatiehandboek (8 pagina's), Handleiding redundantie (8 pagina's), Gebruikershandleiding (3 pagina's), (Duits) Installatiehandleiding van het besturingssysteem (13 pagina's)

Chapter 2—Windows Installation

Windows XP

Start your computer and Windows, and insert the included CD-ROM into

your computer's CD-ROM drive.

Click the Start button, and then click Control Panel.

If the Control Panel window appears as shown below, click "Switch to Classic View" on the

left side of the window in order to see all the control panels.

Go to System Hardware–>Driver signatures–>Driver signature options,

select "Ignore—Install software without asking for conﬁrmation," and then

click OK.

Click OK to close the System Properties window, and then click the Close but-

ton to close the Control Panel window.

Turn off the DM2000/02R96 and use a USB cable to connect the USB TO

HOST port on the DM2000/02R96 to a USB port on your computer.

Turn on the DM2000/02R96.

The Found New Hardware Wizard appears.

Select "Install software automatically (recommended) (I)," and then click

Next.

The driver is installed, and the message "Completing the Found New Hardware Wizard"

appears.

Click Finish, and then restart your computer.

Studio Manager for DM2000/02R96—Installation Guide