Yamaha DM 2000 Version 2 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 37 pagina's. Version 2
Ook voor Yamaha DM 2000 Version 2: Gebruikershandleiding (44 pagina's), Installatiehandleiding (28 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (22 pagina's), Software-installatiehandleiding (13 pagina's), Gebruikershandleiding (1 pagina's), Aanvullende handleiding (4 pagina's), Installatiehandleiding (35 pagina's), Oriëntatiehandboek (8 pagina's), Handleiding redundantie (8 pagina's), Gebruikershandleiding (3 pagina's), (Duits) Installatiehandleiding van het besturingssysteem (13 pagina's)

Chapter 2—Console Window

Master Section

Studio Manager for DM2000 V1.1—Owner's Manual

ONLINE status indicator

This indicator shows whether Studio Manager is online or

ofﬂine.

Meters

These meters display the output level of the Stereo Out when

PAN CONTROL is set to "STEREO," or the Bus Outs used for

surround processing when PAN CONTROL is set to "SURR."

The Meters in 3-1 and 5.1 Surround modes are shown below.

LAYER buttons

These buttons are used to select the Layers.

PAN CONTROL

These buttons are used to select either "STEREO" (Stereo mode)

or "SURR" (Surround mode). The Pan control on the Input

Channels is a rotary control when "STEREO" is selected, and a

dot on a pan graph when "SURR" is selected.

AUTO button

This button displays the Automix status of the Stereo Out.

SELECT button

This button is used to select the Stereo Out. If it's clicked while a

Remote Layer is selected, it will light up, but the Stereo Out will

not appear in the Selected Channel window.

ON button

This button turns the Stereo Out on and off. It appears orange

while the Stereo Out is on.

Channel fader

This is the Stereo Out fader.

3-1

5.1