Yamaha REVSTAR Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha REVSTAR. Yamaha REVSTAR 15 pagina's.
Ook voor Yamaha REVSTAR: Gebruikershandleiding (14 pagina's)

Pagina afdrukken

For best results the bridge should always be adjusted so it is

parallel to the top surface of the guitar as shown in illustration (be-

low). This position is maintained by opposing tension between the

strings and the claw springs. If you change string gauge, you will

need to readjust the spring tension to return the bridge back to the

parallel position.

The adjustment procedures are:

1) Remove the screws that attach the tremolo cavity back plate

from the back side of the guitar exposing the claw springs.

2) Make sure that the guitar is tuned to proper pitch.

3) If the bridge is tilted forward (up), tighten spring tension by

turning the claw screws clockwise. If the bridge is tilted back

(down), loosen the spring tension by turning the claw screws

counterclockwise.

(illustration — A)

Be sure to check string pitch after each adjustment to the

spring tension.

BRIDGE/SPRING TENSION ADJUSTMENTS

Adjust the height uniformly

using the two screws A.