Yamaha SG Gebruikershandleiding - Pagina 13
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha SG. Yamaha SG 15 pagina's.
Ook voor Yamaha SG: Gebruikershandleiding (14 pagina's)
- 1. Table of Contents
- 2. Precautions
- 3. Tuning Machine Tension Adjustment
- 4. HEIGHT ADJUSTABLE LOCKING NUT (if Applicable)
- 5. Setting the String Action
- 6. VIBRATO SYSTEM Vintage Type
- 7. VIBRATO SYSTEM Locking Type
- 8. Bridge/Spring Tension Adjustments
- 9. Truss Rod Adjustment
- 10. Pickup Height Adjustment
For best results the bridge should always be adjusted so it is
parallel to the top surface of the guitar as shown in illustration (be-
low). This position is maintained by opposing tension between the
strings and the claw springs. If you change string gauge, you will
need to readjust the spring tension to return the bridge back to the
parallel position.
The adjustment procedures are:
1) Remove the screws that attach the tremolo cavity back plate
from the back side of the guitar exposing the claw springs.
2) Make sure that the guitar is tuned to proper pitch.
3) If the bridge is tilted forward (up), tighten spring tension by
turning the claw screws clockwise. If the bridge is tilted back
(down), loosen the spring tension by turning the claw screws
counterclockwise.
(illustration — A)
Be sure to check string pitch after each adjustment to the
spring tension.
BRIDGE/SPRING TENSION ADJUSTMENTS
12
A
A
Adjust the height uniformly
using the two screws A.