Yamaha SGV300 Gebruikershandleiding - Pagina 6
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha SGV300. Yamaha SGV300 12 pagina's. Owners manual
Ook voor Yamaha SGV300: Gebruikershandleiding (14 pagina's), Servicehandleiding (11 pagina's)
Pagina afdrukken
String height is indicated by the space between the strings and frets.
Changing this setting will change the manner in which the guitar plays.
If the string height is too high, it will be difficult to play, and if the string height is too low, it will cause fret buzz.
1.
Loosen the strings.
2.
Use the supplied box wrench to remove the anti slip nut on the
1st string and 6th string ends of the bridge.
3.
Use the supplied Allen wrench to turn the height adjustment
screw and adjust the height. Turn both screws alternately and
adjust the height little by little. Please adjust the space between
the 22nd fret and the strings to the following numerical values.
• 1st string: 2.0 +/- 0.2mm
• 6th string: 2.5 +/- 0.2mm
4.
Once adjustment is complete, attach the anti slip nuts and tighten
firmly.
Make sure that the truss rod (the curvature of the neck) has been adjusted
correctly before adjusting the string height. Changing string height will
affect string pitch so please tune the strings after adjustment is complete.
6
Adjusting String Height (Action)
Anti Slip Nut
Raise
Lower
Box Wrench
(Supplied)
Anti Slip Nut
Bridge Height Adjustment
Screw