Yamaha SILENT Bass SLB300 PRO Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha SILENT Bass SLB300 PRO. Yamaha SILENT Bass SLB300 PRO 24 pagina's.

Pagina afdrukken

Insert the end of the string into the hole on the peg, turn the peg and make one or two wraps to

one side of the hole as shown in the illustration below, and then make the remaining wraps in

the opposite direction. From the perspective at the front of the instrument, the first couple of

wraps on the 1st (G) and 2nd (D) strings should be to the left of the hole, whereas on the 3rd

(A) and 4th (E) strings, the first wraps should be made to the right.

Winding the 3rd

and 4th strings

Wind

Remaining

once or

winds

twice

NOTICE

• Before winding the strings, stand the bridge so that the surface of the bridge facing the tailpiece is

vertical to the body surface on which the bridge rests.

• Before winding the strings, make sure that each string is positioned in its corresponding groove on

the bridge.

• Before winding the strings, the adjust string length so that the string does not rub up against the

pegbox wall. Performing tuning while a string is rubbing up against the wall can result in a broken

string or the like.

• When winding strings, be careful that the bridge is not pulled by the strings and pushed down

towards the fingerboard.

Turn the pegs to perform tuning to match the sound of a piano, tuning fork, tuner, or the like.

For more information about tuning, see the cautionary notes under "Tuning" (page 12).

NOTICE

• When not using the instrument for a long period of time, slightly loosen the strings before storage.

• Always use the product with the bridge standing vertical to the surface on which the bridge rests. Using

the product with the bridge leaning to one side can shorten the service life of the bridge and reduce

sound quality.

3rd string (A)

Rotate the

tuning peg

as shown

4th string (E)

Correct

Incorrect

2nd string (D)

Rotate the

tuning peg

as shown

Wind once

1st string (G)

or twice

Incorrect

Tailpiece

Right

angle

Body

SLB300 PRO SLB300 Owner's Manual

Winding the 1st

and 2nd strings

Remain-

ing winds