Yamaha YV-600E Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha YV-600E. Yamaha YV-600E 17 pagina's. Vibraphone, metallophone
Ook voor Yamaha YV-600E: Gebruikershandleiding (14 pagina's), Gebruikershandleiding (18 pagina's), Gebruikershandleiding (16 pagina's)

Pagina afdrukken

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you

or others, or damage to the instrument or other property. These precautions include, but are not

limited to, the following:

Handling

• Never place any objects on the instrument. Doing so can

damage the tone bars or frame.

• Never use the mallets for anything other than playing the

instrument. Doing so can result in injury or accidents. Do not

allow children to use the mallets in any way that may pose a

danger to themselves or others.

• Never strike the tone bars with glockenspiel mallets or any

other solid objects. Doing so can dent or scratch the tone

bars or alter their pitch.

• Treating the controller or driver roughly can damage the

internal circuit board, etc. Please use caution.

• Tone bars can be cleaned using a soft, dry cloth or silicon

cloth. Stains that are still visible may be wiped using off with

a small amount of ethyl alcohol applied to a soft cloth. Never

use thinner, benzine, or a wet cloth.

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument.

NOTICE

• After final adjustment of the legs the fixing screws must be

tightened securely to prevent loosening. Looseness may

cause the instrument to shift during performance and can

also cause noise and other problems. Retighten the screws

from time to time.

• Do not use the instrument in locations with poor ventilation.

• Parts such as switches, volume control, jacks, are called

consumable parts and their function will deteriorate over

time. The level of deterioration will vary depending upon

the conditions under which the instrument is used however

it cannot be avoided. When replacing consumable parts,

please consult with the dealer from whom you purchased

the instrument.

Power/AC adapter

• Never pull on the cord when disconnecting the AC adapter

from the outlet. Always hold the AC adapter when connecting

or disconnecting the power.

• Always disconnect the AC adapter from the outlet when the

instrument is not used for any extended period of time.

• Always use an AC adapter that meets YAMAHA specifica-

tions. The use of any other AC adapter may cause damage.

Installation Location

• Always unplug the power cord before moving the instrument.

The cord may become damaged or you may trip and fall.

• When moving the instrument, move it gently avoiding shocks

and impacts. The instrument is sensitive to shocks and may

become damaged.

• When moving the instrument, move it gently avoiding

shocks and impacts. Also make sure that the power adapter

is disconnected and the caster stoppers are unlocked. Lift

the instrument slightly whenever moving it over surfaces

that are not smooth or flat.

• If the instrument is often moved, bolts, parts, etc., may

become loose. After moving the instrument, check and

make sure all bolts, parts, etc., are firmly fastened. Firmly

tighten all loose items.