Yamaha KX25 Gebruikershandleiding - Pagina 15
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha KX25. Yamaha KX25 49 pagina's. Usb keyboard studio
Pagina afdrukken
For Macintosh:
1.
Make sure that the power to the KX is turned
off.
2.
Disconnect all MIDI cables that connect MIDI
devices to MIDI IN/OUT connectors on the
KX.
3.
After disconnecting all other USB devices
from the computer, connect the KX directly
to the computer (without using a hub) by
using a USB cable.
4.
Start the computer and log on to the
Administrator account.
5.
Insert the "TOOLS for KX DVD-ROM" into
the DVD-ROM drive.
6.
Open the "Extensions for Steinberg DAW"
folder in the DVD-ROM, then double-click
the file "Yamaha Extensions for Steinberg
DAW.mpkg".
The "Welcome to the InstallShield Wizard for
Yamaha Extensions for Steinberg DAW"
window appears.
7.
Click [Continue].
NOTE
· If a dialog box appears asking if you want
to install the software, click [Continue].
· If "Extensions for Steinberg DAW" has
been installed, it will be overwritten by the
new installed version.
8.
Execute the installation by following the
directions appearing on the screen.
NOTE
· You can select only the startup disk as
installation destination.
· During the installation procedure, you can
select the type of "Extensions for
Steinberg DAW" by selecting "Customize"
in the "Installation Type" dialog.
9.
When the installation is complete, a
message indicating that installation is
complete appears. Click [Close].
10.
Install the USB-MIDI driver.
NOTE
· Installation of the USB MIDI driver is
described in "installationguide_**.pdf"
stored in the "USB-MIDI_Driver" folder.
· The "Keyboard Setup Assistant" window
appears when connecting the KX to a
computer via USB. In this case, click the
red circle at the top left corner to close
this window.
11.
Turn the power on of the KX by pressing the
[STANDBY/ON] switch.
The KX will be recognized by the connected
Mac computer.
The installation has been completed.
Setting Up
Owner's Manual
15