Yamaha A-S700 - Amplifier Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha A-S700 - Amplifier. Yamaha A-S700 - Amplifier 24 pagina's. Yamaha a-s700 integrated amplifier owner's manual
Ook voor Yamaha A-S700 - Amplifier: Gebruikershandleiding (40 pagina's)
Pagina afdrukken
CONTROLS AND FUNCTIONS
VOL +/-
Control the sound output level.
This does not affect the REC level for recording,
G)
Input selector buttons
Select the input source you want to listen to.
®
Amplifier control buttons
INPUT
<J/c>
Select the input source you want to listen to.
®
VOLUME
Control the sound output level.
This does not affect the REC level for recording.
cr' · >-- - - - - . ,
@ PURE DIRECT and indicator
Reproduces any input source in the purest sound possible.
The indicator above it lights up when this function is
turned on. See page 10 for details.
O-PllESET-O
BAND
AlBIC/OlE
a
a
6
(5
5
<5
I I
•
~
0 0 0
MUTE
Mute the sound output. Press MUTE again to resume the
audio output. Selected Input indicator blinks when the
sound is muted.
•
Controlling other components
The functions of the buttons to control other Yamaha
components are the same as those ofthe corresponding
buttons on those components. Refer to the components'
instruction manuals for details.
®
Yamaha tuner control buttons
Control various functions of Yamaha tuner. Refer to the
owner's manual of your tuner for details.
•
Controlling this unit
CD
Infrared signal transmitter
Sends signals to the main unit.
®
POWER (I)
Turn on the unit.
".~.~
Noffl,54
This button is operational only when POWER on the front panel
is pressed inward to the ON position.
Not all Yamaha tuners or functions can be controlled by this
remote control.
(]) Yamaha CD player control buttons
Control various functions of Yamaha CD player. Refer to
the owner's manual of your CD player for details.
~1/ailw
."'.=".,,~
Not all Yamaha CD players or functions can be controlled by this
remote control.
@ STANDBY
«(~)
Set this unit to the standby mode.
NoteiJ
.,
"
...
.;,;.;,>~
• This button is operational only when POWER on the front
panel is pressed inward to the ON position.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
control.
I
3
En