Yamaha A-S801 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha A-S801. Yamaha A-S801 30 pagina's. Integrated amplifier
Ook voor Yamaha A-S801: Gebruikershandleiding (20 pagina's), Gebruikershandleiding (48 pagina's)

Pagina afdrukken

Playing a source

SPEAKERS

A AMP

Input selector

buttons

VOLUME +/–

Rotate the VOLUME control on the front

panel fully counter-clockwise so as not to

play sounds loud suddenly.

Press A (power) switch on the front panel

inward to turn on this unit.

Rotate the INPUT selector on the front panel

(or press one of the Input selector buttons on

the remote control) to select the input source

you want to listen to.

The indicator for the selected input source lights up.

If you want to play back the music stored on your PC, select USB

as the input source (see page 13).

PLAYBACK

VOLUME

Set the SPEAKERS selector to the A+B BI-WIRING position

when two sets of speakers are connected using bi-wire

connections, or when using two sets of speakers simultaneously

(A and B).

INPUT

You can adjust to the desired sound by using the BASS,

TREBLE, BALANCE and LOUDNESS controls, the CD

DIRECT AMP button, or the PURE DIRECT button on the front

panel.

If A AMP on the remote control is pressed while the A (power)

switch on the front panel is in the on position, this unit enters

standby mode. Press A AMP again to turn this unit on.

Rotate the SPEAKERS selector on the front

panel to select SPEAKERS A, B or A+B BI-

WIRING.

Play the selected input source.

Rotate the VOLUME control on the front

panel (or press VOLUME +/– on the remote

control) to adjust the sound output level.

When finished listening, press A (power)

switch on the front panel outward to turn off

this unit.