Yamaha AG-Stomp Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha AG-Stomp. Yamaha AG-Stomp 32 pagina's. Yamaha accoustic guitar/pre-amplifier owner's manual
Ook voor Yamaha AG-Stomp: Servicehandleiding (45 pagina's), Lijst met patches (1 pagina's), (Dutch) Handleiding (32 pagina's)

Pagina afdrukken

External Control Settings

A foot controller (expression pedal) (optional), such as the YAMAHA FC-7, connected to the

AG-Stomp's EXP. PEDAL jack lets you control the volume and tone of the AG-Stomp and

effect parameters (setting values). These same parameters can also be controlled with MIDI

control changes.

* In the following section, the abbreviation [FR 1] button refers to the [FEEDBACK REDUCTION 1] button, etc.

I Procedure

1. In the Play Mode, press the [MANUAL] and

[UTILITY] buttons simultaneously.

CtL

" will appear in the display when the Exter-

nal Control Setting Mode is entered.

2. Press the [LIMITER] button.

A control number will appear in the display.

Use the [UP]/[DOWN] buttons to set a control

number.

Up to 8 external control settings (control num-

bers: 1-8) can be stored in the AG-Stomp's

memory. Eight individual controllers can be used

to control individual parameters or a single con-

troller can be used to control 8 parameters.

3. Press the [FR 1] button.

The controller type will appear in the display.

Use the [UP]/[DOWN] buttons to set the type of

controller.

•

: The foot controller connected to the

•

4. Press the [FR 2] button

The parameter type will appear in the display.

Use the [UP]/[DOWN] buttons to set the type of

parameter you want controlled.

oFF

•

: off (no control)

bAL

•

: Balance between the DIRECT tone

StE

•

: The stereo position of the two mics

AG-Stomp's EXP. PEDAL jack is the

controller.

: Control change data re-

ceived from an external MIDI de-

vice connected to the AG-Stomp's

MIDI IN jack does the controlling.

Select the appropriate control

change number. (Refer to the

Owner's Manual for the external

MIDI device for information on MIDI

control change numbers.)

and the MIC tone (BLEND)

(STEREO)

A. P r

•

: Post pre-amp volume

A. r E

•

: Post reverb volume

bAS

•

: Tone Control (BASS)

mid

•

: Tone Control (MIDDLE)

trE

•

: Tone Control (TREBLE)

PrE

•

: Tone Control (PRESENCE)

Lmt

•

: Limiter Level

SPd

•

: SPEED/TIME settings for the Cho-

rus/Delay Effects

dPt

•

: DEPTH/FEEDBACK settings for the

Chorus/Delay Effects

•

: LEVEL setting for the Chorus/De-

lay Effects

•

: REVERB setting for the Reverb Ef-

fect

The controller that is set in step 3 of this proce-

dure can control the above parameters (setting

values).

5. Press the [FR 3] button

The minimum parameter value (the controller's

minimum parameter value) will appear in the dis-

play.

Use the [UP]/[DOWN] buttons to set the value

(0.0-10.0).

6. Press the [FR 4] button

The maximum parameter value (the controller's

maximum parameter value) will appear in the dis-

play.

Use the [UP]/[DOWN] buttons to set the value

(0.0-10.0).

7. Press the [UTILITY] button to return to the Play

Mode.

These external control settings are stored

with patch data.

Also, in the Utility Mode, there is a function

that is not related to patch data settings that

sets the Utility Mode's External Control to

always ON (effective) or always OFF. (→ page

26)