Yamaha CMA3SB Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha CMA3SB. Yamaha CMA3SB 24 pagina's.
Ook voor Yamaha CMA3SB: Gebruikershandleiding (36 pagina's)

Pagina afdrukken

Installing in a ceiling (using the CMA3S)

You can use the optional VXS3S ceiling mount adaptor to install the

speaker in a ceiling.

Cut a hole in the ceiling

1-1

Use the included cutout template (350mm×210mm) to mark the

outline of the hole on the ceiling.

NOTE

Make sure to use the included cutout template; if the hole size is not correct, you

will not be able to install the speaker.

1-2

Cut along the outline and cut the hole.

When cutting the hole, be careful to prevent debris or dust from

entering your eyes.

Attach the square ring and rails to the inside

surface of the ceiling.

2-1

Insert the two tile rails through the cut hole and place them on the

ceiling surface within your reach. Be sure that each tile rails are

oriented as shown in the illustration.

2-2

Insert the square-ring through the cut hole.

2-3

Secure the square-ring and tile rails with supplied two screws

through either slot of both square-ring brackets.

VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual