Yamaha DBR Series Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha DBR Series. Yamaha DBR Series 10 pagina's.

Installation using eye bolts

Attach commercially-available eye bolts (M8 x 15 mm) to the screw holes located at the bottom (two locations)

and on the upper rear (one location, only for DBR15 and DBR12). Keep in mind that you will need two points

at the bottom to suspend the unit.

Note

Make sure to use eye bolts according to the standards and safety regulations in your area.

❚

NOTICE

The strength of an eye bolt differs depending on the suspension angle. Make sure to use eye bolts within a

range of 0 to 45 degrees from a right angle (as shown).

Correct:

Within 45° from a right angle

Incorrect: Do not suspend the eye bolts as shown in the illustrations below.

M8 eye bolt

0°

45°

Only one suspension point

Max. 45°

More than 45° from a right angle

More than 45°

(Pullback point for

DBR15 and DBR12 only)

Max. 45°

More than 45°