Yamaha Electone HS-7 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha Electone HS-7. Yamaha Electone HS-7 20 pagina's. Serie hs monitor da studio alimentato e subwoofer alimentato
Ook voor Yamaha Electone HS-7: Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (21 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (20 pagina's), Servicehandleiding (43 pagina's), (Engels) Gebruiksaanwijzing (20 pagina's)

Yamaha Electone HS-7 Gebruikershandleiding
 Recommended cables
 For connection to a balanced XLR input.
 For connection to an unbalanced phone jack input.
NOTE Refer to "Connectable cables" on page 5 for more connector
details. The configurations of the balanced and unbalanced
phone jack connectors are different.
Connectin to a Synthesizer or
Other Electronic Musical Instrument
When connecting an electronic musical instrument
such as a Yamaha MONTAGE synthesizer to the HS
series speakers, connect the instrument's L/MONO and
R outputs to the HS speaker inputs.
HS /HS7/HS5
OUTPUT L/MONO
 Recommended cables
 For connection to an unbalanced phone jack input.
HS /HS7/HS5
HS /HS7/HS5
HS /HS7/HS5
OUTPUT R
HS /HS7/HS5
NOTE Refer to "Connectable cables" on page 5 for more connector
details. The configurations of the balanced and unbalanced
phone jack connectors are different.
Settin Up for Superior
Sound
A number of points should be observed when laying out
a monitor speaker system.
1.5 meters or more
1.5
meters
or more
60˚
 Point 1
Position speakers at least 1.5 meters away from
walls or corners.
Ideally, the speakers should be located at least 1.5
meters away from walls or corners. In situations where it
is not possible to position the speakers a sufficient
distance from walls or corners, the ROOM CONTROL
switch can be used compensate for excessive bass. As
you move the speaker closer to walls or corners, a
higher compensation setting may be required to
achieve natural sounding response ([0] → [-2] → [-4]).
HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual
9