Ecoplus ELITE Series Instructies voor installatie en onderhoud - Pagina 7

Blader online of download pdf Instructies voor installatie en onderhoud voor {categorie_naam} Ecoplus ELITE Series. Ecoplus ELITE Series 12 pagina's. Commercial grade, automatic submersible pump

Pagina afdrukken

7. START-UP

1) Insert the plug of the power cable in a 115 – 120V power socket.

2) When the float reaches the ON level, the pump will start and will continue operating

until it reaches the OFF level.

Automatic operation (A):

3) The integrated float switch starts and stops the pump automatically when the

indicator (2) is positioned on "A".

Manual operation (M):

4) To start the pump, lift the knob (3) position indicator (2) on "M". In these conditions the

suction level of the pump will be down to 0.08"-0.12" ( 2-3 mm).

5) In order to check the performance and/or clean the float switch, open the cover (1)

position the knob (3) to "O".

8. PRECAUTIONS

RISK OF FREEZING: when the pump remains inactive at a temperature lower than 32º F, it

is necessary to ensure that there is no water residue which could freeze causing cracks in the

plastic parts. If the pump has been used with substances that tend to form deposits, or with

water containing chlorine, rinse after use with a powerful water jet in order to avoid the

formation of deposits or coatings which would reduce the performance of the pump.

Automatic operation (A)

Manual operation (M)