Directechs DIRECTED DB3 403.FORD18 Gebruiksaanwijzing - Pagina 10
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Directechs DIRECTED DB3 403.FORD18. Directechs DIRECTED DB3 403.FORD18 20 pagina's.
Pagina afdrukken
Module programming for convenience features only (skip transponder)
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
1
Ensure vehicle is in a safe location and cannot move forward during programming.
The harnesses must be connected in this exact order:
1. Connect the 14-pin.
2
2. Connect the 12-pin.
3. Connect the 10-pin.
When the LED turns on solid red, proceed with the next step.
Press the programming button five (5) times.
3
The LED turns ON solid orange.
Press the Push-to-Start (PTS) button once (1) to turn the ignition ON.
The LED will flash orange for up to 15 seconds.
4
Then, the LED will flash green, orange, green, and then turn OFF.
5
Press the PTS button once (1) more to turn the ignition OFF.
You have successfully completed the module programming sequence.
10
403.FORD18 1.06 2021 Lincoln Nautilus (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Solid
Connect
Solid
Press &
Release x5
x3 Secs
Solid
Off
Flashes
x3 Secs
Flashes
Flashes
Flashes
Off
Solid
O
O