Yamaha YST-MS55D Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha YST-MS55D. Yamaha YST-MS55D 15 pagina's. Powered multimedia speakers
Ook voor Yamaha YST-MS55D: Servicehandleiding (34 pagina's)

Pagina afdrukken

Make the following settings on your computer after the installation of the driver is ﬁnished.

Setting of Audio and Audio CD

1. Click the Windows "Start" button and select

"Settings", and then "Control Panel".

2. Double-click the "Sounds and Multimedia"

icon.

3. Click the "Audio" tab and select "USB Audio

Device" at "Preferred device" of "Sound Play-

back".

* Usually, this setting is automatically made.

4. Click the "Hardware" tab and double-click the

item of the DVD or CD-ROM to be used in the

"Devices".

5. Click the "Properties" tab, and click the check

box of "Enable digital CD audio for this CD-

ROM device" to enter the check mark.

* It may happen that the check box cannot be

clicked because some CD-ROM drives cannot

be used for playing audio CDs.

6. Restart Windows, and log in with Administra-

tor.

Note:

When using two or more drives, you must make

the above setting for each drive.

Checking sound output and adjusting volume

1. Make the following operations on the front

panel of this unit.

a) Press

button to turn on this unit.

b) Use the volume control to adjust the volume.

2. Adjust the volume on the computer as follows.

a) Double-click the speaker icon on the task tray,

or select "Start", "Programs", "Accessories",

"Entertainment" in this order and click "Vol-

ume Control".

(The volume adjustment window appears.)

b) Adjust the volume by dragging the "Volume"

slider. Set the slider between the center and

max. position.

* Do not enter the check mark in the "Mute"

check box. If entered, sound output will stop.

3. Click the Windows "Start" button and select

"Settings", and then "Control Panel".

4. Double-click the "Sounds and Multimedia"

icon.

5. Click the "Sounds" tab.

6. Check that the sound is output normally by out-

putting "Default Beep", etc. from "Sound

Events".

* If no sound is heard, restart Windows and check

again.

E-