Yamaha YVC-1000 Gebruikershandleiding - Pagina 30
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Yamaha YVC-1000. Yamaha YVC-1000 37 pagina's. Microphone & speaker system
Ook voor Yamaha YVC-1000: Gebruikershandleiding (45 pagina's), Gebruikershandleiding (16 pagina's), Testhandleiding (2 pagina's)
Pagina afdrukken
Adjusting the speaker volume
When external speakers are not connected or only the
built-in speaker is enabled, press the volume + and -
buttons (
) to adjust the volume.
If external speakers are enabled, perform the following
procedure to suit the environment they are used in.
■
When both the built-in speaker and
external speakers are enabled:
1.
Set the volume of external speakers to the minimum.
2.
Press the volume + and - buttons (
volume of the built-in speaker.
3.
Adjust the volume of external speakers.
■
When only external speakers are
enabled:
First, take steps 1 to 3 described below to fix the volume
of the external speakers. Then, use the volume + and -
buttons (
) of the product to adjust the volume
when you are using the product.
1.
Set the volume of external speakers to the minimum.
2.
Press the volume + button (
the maximum.
3.
Adjust the volume of the external speakers to the
maximum level available during use.
4.
Press the volume + and - (
volume to the desired level.
Note
When adjusting the speaker volume, be careful to cause
no sound cracking. Sound cracking may cause an echo
phenomenon on the other side.
y
If you operate the volume + and - buttons (
Control Unit, you can adjust the volume of both the built-in
speaker and external speakers.
If a PC or a Mac is connected using the USB cable, its speaker
volume is adjusted synchronously.
29
) to adjust the
) to set the volume to
) buttons to adjust the
) of the
Muting the microphone
Temporarily stop the microphone so that the other party
does not hear a voice in this side.
■
Muting the microphone
Press the microphone mute button (
The microphone status indicator lights up red, and
microphone muting starts.
■
Canceling microphone muting
Press the microphone mute button (
microphone muting.
The microphone status indicator lights up green, and
microphone muting is canceled.
y
The microphone muting function is synchronized with all
microphones. If one microphone is muted while multiple
microphones are connected, all of them are muted.
Muting the speaker
Temporarily mute the speaker so that incoming sounds
cannot be heard.
This function is available only when a PC or a Mac is
connected using the USB cable.
■
Muting the speaker
Mute the speaker on a PC or Mac.
The volume + and - buttons (
speaker is muted.
■
Unmuting the speaker
Unmute the speaker on a PC or Mac that has been
muted.
The volume + and - buttons (
the speaker is unmuted.
).
) during
) flash green, and the
) light up green, and