Directed 403.SUBARU11 Installatiehandleiding - Pagina 18

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Directed 403.SUBARU11. Directed 403.SUBARU11 19 pagina's.

Pagina afdrukken

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

Factory remote.

2. Aftermarket remote.

3. Directed SmartStart

application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

No vehicle takeover on 2020-2023 Subaru Crosstrek Hybrid (Smart Key)

The vehicle takeover feature is not available on these vehicles. The vehicle engine will shut

down as soon as a door is opened.

Vehicle takeover with Get In and Go

Close the vehicle doors, hood and trunk, then press

the Remote Start button on the transmitter to start the

vehicle.*

Press the Unlock button on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle, while making sure the factory remote is

inside with you.

Depress the brake pedal for a minimum of 3 seconds then

put the car in gear and drive off.

* Icon and remote appearance may differ depending on the model purchased.

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their Push-to-

Start (PTS) equipped vehicle, once it has been remote started.

403.SUBARU11 1.06 2022 Subaru Outback (Smart Key)

Typically, users would have to remote start their vehicle, then get inside and press the PTS

button to perform a takeover. There is therefore a physical action required to drive away.

With Get In and Go, you simply remote start the vehicle, unlock the doors, get in and go...

All that's left to do is put the gear in drive and drive off.

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

Exit the vehicle with the factory remote in hand (it is safe

to leave the engine running).

Notes: We recommend that you always lock the doors of

your vehicle when leaving it unattended.

Press Remote

Start button*

* Icon and remote appearance may differ depending on the model purchased.

Press Unlock on

List of available commands

either remote*

Note that the information below is for many Viper

Autostart

model and options purchased. Refer to your authorized installation center for more specific

information.

14:36

Enter vehicle

with remote

Button(s)

Ready to

drive off

* Icon and remote appearance may differ depending on the model purchased.

14:36

and AstroStart

models. Icons and commands may differ depending on the

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).

Put

gear in

Park

Parking lights flash x1

Press Remote

Start button*

Exit vehicle

with remote

, Clifford

, Python

, Avital

, Automate

14:36