Clark Synthesis TACTILE SOUND AW339 Installatiehandleiding - Pagina 14

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Clark Synthesis TACTILE SOUND AW339. Clark Synthesis TACTILE SOUND AW339 20 pagina's. All-weather transducer
Ook voor Clark Synthesis TACTILE SOUND AW339: Aanvullende handleiding (4 pagina's), Gegevensblad (1 pagina's), Installatiehandleiding (8 pagina's), Installatiehandleiding (2 pagina's), Kopershandleiding (2 pagina's), Specificatieblad (1 pagina's)

Wiring & Connections

HOME THEATER

There are several different ways to hook up your system in terms of which source material (signal)

is delivered to the amplifier(s) and Transducer(s). Since our inception, we have discovered that

approximately half of our customers prefer using the LFE/SUB signal with their Transducers. The other

half prefer using the Right Front (RF) and Left Front (LF) signals. Additionally, there are a few people

who like to use multiple signals concurrently. In the following instructions, we provide you with general

diagrams for each of these hookup methods.

LFE/SUB Hookup

The LFE, SUB, or Subwoofer output is the signal that you send to the subwoofer.

If your receiver has only one LFE/SUB/Subwoofer output port, connect a "Y" adapter to that output.

This will allow you to split the signal between the Transducer and the subwoofer. To do this properly,

connect your subwoofer to one side of the "Y" adapter. Connect the amplifier to the other side of the

"Y" adapter. To reduce the amount of noise produced when using this signal, use another "Y" adapter

cable when connecting to the amplifier. This will allow you to connect the signal into both the Left and

Right input connectors on the amplifier.

Amplifier

(100 - 150

Watts into

4 ohms)

Output

Transducer

Tactile Sound Transducers

Surround-Sound Receiver

OUT

–

Y Adapter

LFE/SUB

Y Adapter

To Input of

Powered

Subwoofer

www.clarksynthesis.com

Subwoofer