Clark Synthesis TACTILE SOUND AQ339 Aquasonic Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Clark Synthesis TACTILE SOUND AQ339 Aquasonic. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 20 pagina's. Underwater speaker
Ook voor Clark Synthesis TACTILE SOUND AQ339 Aquasonic: Aanvullende handleiding (4 pagina's), Specificaties (1 pagina's), Onderdelenlijst (1 pagina's), Gebruikershandleiding (1 pagina's), Referentieblad (1 pagina's), Installatiehandleiding (12 pagina's), Installatiehandleiding (3 pagina's), Specificatie (1 pagina's)

STAINLESS STEEL SCREEN INSTALLATION

Carefully remove the rubber

ring from face ring screw.

Save the rubber ring.

Place the bottom of the screen

into the face ring aligning the

feet around the tab. Note that

the smooth beveled side of the

screen should face outward

toward the front of the face

ring.

www.clarksynthesis.com

Remove the screw from the

face ring. Save the screw.

Push the screen all the way

into the face ring. You may

need to flex the screen in a

little to ensure a secure fit.

Carefully place the rubber

ring onto the face ring

screw.

Put on a pair of work gloves

to avoid being cut by the

screen's sharp edges.

Insert the screw through the

face ring. There is a small

hole cut out for the screw in

the screen.

Diluvio

Underwater Speaker

™