Directed Xpresskit DBALL2 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 14 pagina's. Ford5 remote start ready (rsr) installation
Ook voor Directed Xpresskit DBALL2: Installatiehandleiding (12 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (13 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (15 pagina's), Handleiding voor installatie en snelle referentie (16 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (16 pagina's), Handmatig (19 pagina's), Installatiehandleiding (11 pagina's), Installatiehandleiding (10 pagina's)

Platform: DBALL/DBALL2

Firmware: FORD5 Range Extender Ready (RXT) Installation

Wiring Diagram

Important!

The Remote Start Safety Override Switch is a mandatory safety device, but is NOT supplied with the DBALL.

OBDII Diagnostic Connector

MS CAN High:

HS CAN High:

Gray/Orange, pin 3

White/Blue, pin 6

MS CAN Low:

HS CAN Low:

Violet/Orange, pin 11

White, pin 14

(-) Ground:

Black or Black/White, pin 4

With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).

MS CAN High: Tan/Black: 3

MS CAN Low: Tan: 4

(+) 12V:

pin 16

HS CAN High: Orange/Green: 5

HS CAN Low: Orange/Brown: 6

(+) 12V: Red: 13

(-) Ground: Black: 14

DBALL/

Prog. Button

DBALL2

LED

You can connect to either a XL202

RFTD OR a SmartStart module.

Refer to the SmartStart/XL202

Installation Notes for more information.

Rev.: 20160317

Page 3