Caliber CALNAV Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Caliber CALNAV. Caliber CALNAV 13 pagina's. Global positioning system

Pagina afdrukken

INSTALLATION

any safety components.

• The display of your navigation system

may show "light reflexions". Please

make sure of not being "blinded" during

operation.

• Do not mount the components within

the airbag deployment zones.

• Check the secure adherence of the

suction cup at regular intervals.

• The power plug will consume power,

even if no device is connected. Remove

it when not in use to avoid draining the

battery.

• Check all safety equipment in your car

after installation.

Additional Notes for Using the

Navigation System on a Bike

• Make sure during installation that the

ability to steer is not impaired.

Mounting the Navigation Set in a Car

Attention! Only fix the holder for the

navigation system to the windscreen, if it

does not impede the view. Should this

not be possible, then mount the holder

with the enclosed suction plate in any

way that will allow peril-free and safe

operation.

Installing the Car Holder

• Note: If you want to fix the car holder

to the windscreen, you can skip step 1

and 2.

1. Remove the protective foil from the

sticky side of the suction plate.

2. Fix the suction plate to a suitable

position on the dashboard. Take care,

that the surface of the dashboard is

clean and press the suction plate

strongly onto the surface.

• To obtain a strong and secure hold the

suction plate should not be used for 24

hours.

Suction

Car

Holder

3. Mount the car holder to the flexible

neck. Note the labels on the flexible

neck. The arrow labelled CLOSE must

Plate

Suction

head

Flexible

Neck

point to the direction of the fixture. The

connection locks in with a noticeable

clicking sound.

1. Place the holder with the suction head

onto the suction plate (or directly onto

the windscreen) and press the lever on

the suction head downwards. The

suction head will stick itself firmly to

the suction plate.

2. Set the navigation system into the car

holder by placing it initially in the lower

noses and then pressing it down gently

until the holder clicks in.

Connecting the Car Adaptor

When the battery is low, you can recharge

the device in the car:

1. Connect one end of the car charger to

connector at the bottom of your

navigation system.

2. Now insert the power adaptor into the

cigarette lighter socket and ensure that

it will not lose contact while driving.

This could cause a malfunction.

• Note: Remove the car adaptor from

the cigarette lighter socket when ending

a trip or when parking the car for an

extended period of time.

Holder