Directed Xpresskit DBALL2 Installatiehandleiding - Pagina 6

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 16 pagina's. Ford5 remote start ready (rsr) installation
Ook voor Directed Xpresskit DBALL2: Installatiehandleiding (12 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (18 pagina's), Handmatig (14 pagina's), Installatiehandleiding (13 pagina's), Installatiehandleiding (14 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (15 pagina's), Handleiding voor installatie en snelle referentie (16 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (16 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (16 pagina's), Handmatig (19 pagina's), Installatiehandleiding (11 pagina's), Installatiehandleiding (10 pagina's)

Pagina afdrukken
Directed Xpresskit DBALL2 Installatiehandleiding
Platform: DBALL2
Firmware:
CHRYSLER11 ange Extender
SmartStart/
XL
202 Installation Notes
Th
e
DBALL
Range Extender Ready (
SmartStart (all sold separately).
SmartStart Revision A
SmartStart is
optional
and not included. It
Configuration Wires (White & Brown or Blue)
DBALL/
DBALL
2
CABLE
D2D (4 pins, white)
The modules must be connected in a specific order. Refer to the
SmartStart Revision B
SmartStart is
optional
and not included. It
DBALL/
DBALL
2
CABLE
D2D (4 pins, white)
The modules must be connected in a specific order. Refer to the
RF Kit
The
optional XL
202 and antenna are not included and
DBALL/
DBALL
2
XOVER
1. Use the D2D Crossover (
2. The modules must be connected in a specific order. Refer to the
RF
Kit
&
PKE
Combination
Refer to the Passive Keyless Entry (
RF
Kit
,
PKE
& SmartStart
Refer to the Passive Keyless Entry (
R
RXT
)
solution offers
This section provides specific installation information for SmartStart and
MUST
be purchased separately.
Cut Brown or Blue Loop
4 pins
2 pins,
not used
MUST
be purchased separately.
Configuration Wires (Gray & White)
Connect Gray wire to (-) Ground
5 pins
4 pins
2 pins,
not used
LED
LED
XL202
Prog.
Button
XOVER
) cable that is provided with
PKE
) Installation Guide (N2102T) for detailed wiring information.
BT
Combination
PKE
) Installation Guide (N2102T) for detailed wiring information.
Ready
(RXT)
Installation
two 2
( ) configuration options to control your system;
OR
SmartStart
LED
Module Programming
section for more information.
THIS SIDE UP
Module Programming
section for more information.
MUST
be purchased separately.
XL
202, and
NOT
the one in the
Module Programming
section for more information.
XL
DBALL
package.
© 2017 Directed. All rights reserved.
Rev.: 20170724
Page 6
RF
Kit or
202.