3Com SWITCH 4060 Snelle referentiehandleiding - Pagina 10
Blader online of download pdf Snelle referentiehandleiding voor {categorie_naam} 3Com SWITCH 4060. 3Com SWITCH 4060 12 pagina's. Product guide
Ook voor 3Com SWITCH 4060: Gegevensblad (6 pagina's), Gegevensblad (4 pagina's), Producthandleiding (14 pagina's)
Pagina afdrukken
Command (Continued)
protocol ip ping
protocol ip rip authentication
protocol ip rip mode
protocol ip rip neighbors
protocol ip rip poisonReverse
protocol ip rip receiveMode
protocol ip rip resetStats
protocol ip rip sendMode
protocol ip rip statistics
protocol ip rip summary
protocol ip rip updateTime
protocol ip route add
protocol ip route default
protocol ip route find
protocol ip route flush
protocol ip route noDefault
protocol ip route remove
protocol ip route summary
protocol ip udpHelper add
protocol ip udpHelper remove
protocol ip udpHelper summary
security device access modify
security device access summary
security device user create
security device user delete
security device user modify
security device user pwdRecover
security device user summary
security network access accessList add
security network access accessList flush
security network access accessList modify
security network access accessList remove
security network access accessList summary
system control initialize
system control reboot
system control softwareUpgrade
system inventory
system management alert AddAddress
10
What does the Command do?
Polls remote devices.
Specifies authentication passwords and sets the interface
authentication mode.
Enables or disables the RIP operation.
Displays neighbor information.
Enables or disables poison reverse.
Sets the interface receive mode.
Resets the RIP statistics.
Sets the interface send mode.
Displays the RIP interface statistics.
Displays RIP information.
Sets the update time.
Adds a static route to the routing table.
Defines the default route.
Finds an existing route in the routing table.
Removes all learned routes.
Removes the default route.
Removes an existing route.
Displays summary information for the default route.
Creates UDP Helper servers by defining pairs of UDP ports
and IP addresses.
Removes a UDP Helper server.
Displays information about the existing UDP Helper servers.
Modifies access rights.
Displays summary information on access rights.
Creates a user.
Deletes a user.
Modifies a user.
Enables or disables password recovery.
Displays summary information on users.
Adds an access list rule.
Removes all access list rules on a selected VLAN.
Modifies an access list rule.
Deletes an access list rule.
Displays the current rules in the access list.
Resets to factory defaults.
Performs a system reboot.
Performs an agent software upgrade.
Displays information about the unit.
Adds an email address to an alert.