Clarke 3110375 Handleiding voor bediening en onderhoud - Pagina 6

Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke 3110375. Clarke 3110375 17 pagina's. Air stapler

THE COMPRESSED AIR SUPPLY

WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU

ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF

COMPRESSORS AND COMPRESSED AIR SUPPLIES.

• Use only clean, dry, regulated compressed air as a power source.

• Air compressors used with the impact wrench must comply with the

appropriate European Community Safety Directives.

• A build-up of moisture or oil in the air compressor will accelerate

wear and corrosion in the impact wrench. ensure any moisture is

drained from the compressor daily and the inlet filter is kept clean.

• Line pressure, or hose ID., should be increased to compensate for

unusually long air hoses (over 10M). Minimum hose dia. should be

6mm (1/4") ID., and fittings should have the same inside dimensions.

• The air hose must be rated at least 150% of the maximum operating

pressure of the tool.

• A typical air line layout is shown above. If an automatic in-line filter/

regulator is used, it will keep the tool in good condition, but should

be regularly checked and topped up with oil. SAE 10 oil should be

used, and the lubricator adjusted to approx 2 drops per minute.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]