Directed AS-3472TW Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Directed AS-3472TW. Directed AS-3472TW 20 pagina's.

Pagina afdrukken

Button Function:

The order of LEVELS and MENU can be re-arranged using the

Menu. Details on (page-18).

F Button Function

FBPRO

(15)

Function Button

programming

Remote-Starting Your Vehicle

Setting Your Vehicle Into Ready Mode

If your vehicle has a manual transmission you must read the following indications. The unit must

first be set to Ready Mode in order to start the vehicle by remote. If the unit is not set to Ready

Mode, it cannot remote start the vehicle. Please note that Ready Mode can be enabled by the

remote or the handbrake, depending on the option that was selected by your installer. Therefore,

you must follow the appropriate procedure between the two described below in order to set your

vehicle into Ready Mode.

Once the system is set to Ready Mode, the vehicle can be remote started and stopped at any time.

The system will exit Ready Mode if a door, the hood or the trunk is opened, if the brake pedal is

pressed, if the parking brake is disengaged or if the ignition key is turned to the IGNITION ON

(RUN) position.

To set the system to Ready Mode:

If Ready Mode is enabled by remote

1. Ensure that all the doors, hood and trunk are closed. Make sure that the gear selector is in the

neutral position.

2. With the engine running, apply the parking

brake once and release the brake pedal.

3. Within 20 sec. of engaging the parking

brake, press and hold

transmitter (SmartStart™ uses only the

SmartStart™ icon).

The parking lights will flash 3 times quickly

and remain lit. Release the button.

Remove the key: the engine will keep on running.

Exit the vehicle. All doors should be closed, including the hood and trunk.

THERE ARE THREE POSSIBLE OPTIONS TO COMPLETE READY MODE (programmable

by installer)

OPTION 1: No lock

The engine runs for 8 sec.

before finally shutting down

the engine, without user

interaction

User Guide

on the

OPTION 2: Manual shut down

The engine keeps going until you

press either;

to lock the doors and shut

down the engine;

FBPRO

Function Button Programming

1 2 3 M

2 3 1 M

3 1 2 M

2 1 3 M

M 1 2 3

If Ready Mode is enabled by handbrake

2. With the engine running, apply the parking

brake twice within 10 sec.

3. Make sure to release the brake pedal.

The parking lights will flash 3 times quickly

and remain lit.

(default)

Button Function

Level 1, level 2, level 3, MENU

Level 2, level 3, level 1, MENU

Level 3, level 1, level 2, MENU

Level 2, level 1, level 3, MENU

MENU, level 1, level 2, Level 3

OPTION 3: Automatic shut

down

The engine runs for 8 sec.

then locks the doors before

finally shutting down the

engine,

without

user

P.9