Clarke 6480231 Originele handleiding - Pagina 8

Blader online of download pdf Originele handleiding voor {categorie_naam} Clarke 6480231. Clarke 6480231 17 pagina's. Electric drill bit sharpener

OPERATIONS

BEFORE EACH USE

What

Check the power cable and plug for

damage

Check the grinding stone

Cleaning the device

CORRECTLY SHARPENED BITS

Your bit is correctly sharpened when it has the following characteristics.

• A sharp point in the center of the bit.

• Two sharp and equal cutting edges

• Two trailing edges that are slightly lower than the cutting edges.

ADJUSTING THE GRINDING STONE

1. Turn the grinding stone height

adjustment knob clockwise to

raise the stone.

• This will give you a more

aggressive cutting action. This is

also useful when you are

working with short bits.

2. Lower the stone by turning the

adjusting knob anti-clockwise.

• This will produce a finer ground

edge, though it will take longer and require more repetitions.

SHARPENING PROCEDURE

NOTE: This sharpener uses a dry grinding stone. DO NOT use any

sharpening oils or lubricants with this tool.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

How

Conduct a visual inspection and

have the cable replaced by an

electrician if necessary.

Visual check, Change the grinding

stone if necessary (see page 10).

Wipe the unit with a damp cloth.

Remove grinding residue with a dry

brush.