Clarke CHT204 Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Clarke CHT204. Clarke CHT204 4 pagina's.

3. Tighten lock nut (1) to secure the setting.

METHOD OF USE

NOTE: Preferably, DO NOT use knuckle or universal joints, as these could result

in incorrect torque settings.

1. Place the square drive on to the socket or extension bar, perpendicular to

the nut/bolt to be tightened.

2. Gripping the knurled handle with the right hand, whilst steadying the 1/2"

square drive end with the left, gently but firmly, pull the handle (i.e. in a

clockwise direction) until a click is heard, and a slight 'break' in the handle

is felt. DO NOT turn any further.

• Do not jerk the torque wrench in any way to tighten a nut. Apply

even pressure throughout the operation.

• Release the wrench immediately the click is heard/felt.

• It should be noted that the 'click' becomes weaker with the lower

torque settings.

ACCESSORIES

• 1/2" Square Drive, x 5" Extension bar

• 1/2" x 3/8" Square Drive adaptor

• Carrying Case

MAINTENANCE

Each torque wrench has been lubricated before leaving the factory. If the

wrench has not been used for some time, operate it several times allowing the

lubricant to re-coat the internal working parts.

• After use, keep adjustment at lowest torque setting.

• Do not turn handle below lowest torque setting.

• Clean wrench by wiping. Never immerse in any type of cleaning

fluid.

• The wrench may occasionally require servicing/recalibration in order

to ensure accurate readings, in which case, contact your CLARKE

dealer.

CONVERSION FORMULAE

1kg cm=

1kg/m =

1kg cm=

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

13.887 oz/in

0.08677 lbf /in

7.233 lbf/ft

0.098 N/m

1Nm =

1kgm =

14.161oz/in

8.8507 lbf/in

0.73756 lb/ft

9.80665 N/m