Clarke CPSB200B Handleiding voor bediening en onderhoud - Pagina 11
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CPSB200B. Clarke CPSB200B 17 pagina's. Pressurised sandblaster
Pagina afdrukken
3. When you notice only air (no
abrasive material) is coming out
of the gun, release the trigger and
close the Air Supply Valve, see Fig
16.
4. Ensure the throttle valve is open,
see Fig 17.
5. Point the gun in a safe direction.
6. Press the trigger until air stops
flowing and pressure gauge reads
"0".
7. Disconnect air supply hose from
the supply valve.
MAINTENANCE
WARNING: DISCONNECT THE SANDBLASTER FROM THE AIR SUPPLY AND
RELEASE ANY PRESSURE IN THE TANK AND HOSE BEFORE CHANGING
ACCESSORIES, ATTEMPTING TO MOVE THE SANDBLASTER OR
PERFORMING ANY MAINTENANCE.
1. Keep your sandblaster clean and protect it from damage.
2. When initially pressurising, check for leaks at the top of the tank and at all
hoses and fittings.
3. Leaking joints maybe repaired by replacing worn or damaged parts or
using teflon tape.
4. Check for worn abrasive hose and fittings.
5. Watch for leaks, blistering, bulging or thinning of the hose.
6. Replace any parts which appear worn.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Fig 16
Fig 17
11