Directed Directechs DB3 Installatiehandleiding - Pagina 17

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Directed Directechs DB3. Directed Directechs DB3 18 pagina's. Smart key for 2013 toyota highlander
Ook voor Directed Directechs DB3: Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Handmatig (6 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (10 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (10 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's), Installatiehandleiding (19 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (17 pagina's), Installatiehandleiding (20 pagina's), Installatiehandleiding (18 pagina's)

Pagina afdrukken
Directed Directechs DB3 Installatiehandleiding

Quick Reference Guide

Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
•
Factory remote.
•
Aftermarket remote.
•
Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover with regular key & knob
Close the vehicle doors, hood and trunk, then send
1
the Remote Start command to start the vehicle.*
Send the Unlock command on the factory or
2
aftermarket remote.*
Enter the vehicle, while making sure the factory
3
remote is inside with you.
Insert your key in the ignition barrel, and turn it
4
to the ON position or turn the know to the RUN
position.
Depress the brake pedal, put the car in gear and
5
drive off.
* Icon and remote appearance may differ depending on the model purchased.
17
403.MIT3 2.11 2011 Mitsubishi Lancer Evolution
©2021 VOXX•DEI LLC. All rights reserved.
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the
1
gear in Park (P).
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
It is safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the
doors of your vehicle when leaving it unattended.
Press Remote
Start button*
* Icon and remote appearance may differ depending on the model purchased.
List of available commands
Press Unlock on
either remote*
Note that the information below is for many Viper, Clifford, Python, Avital, Automate,
Autostart and AstroStart models. Icons and commands may differ depending on the
model and options purchased. Refer to your authorized installation center for more
14:36
Enter the
vehicle with
specific information.
the remote
Button(s)
Ready to
drive off
* Icon and remote appearance may differ depending on the model purchased.
14:36
14:36
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
*
* Press & hold for 5 seconds to activate the trunk release (optional).
Put
gear in
Park
&
Parking lights flash x1
Press Remote
Start button*
14:36
Exit vehicle
with remote