Clarke RI150LI Handleiding voor bediening en onderhoud - Pagina 6
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke RI150LI. Clarke RI150LI 13 pagina's. Rechargeable inflator
Pagina afdrukken
OPERATION
THE DISPLAY PANEL
The display panel will illuminate and
display the following:
• Measured pressure value (1)
• Battery level (2)
• Unit of measurement (3)
• Progress bar (4)
• Preset pressure value (5)
• Operating mode (6)
CHARGE AND DISCHARGE MODES
Connect the USB-C cable to an adaptor (not supplied) to charge the device.
• When charging, the battery indicator will flash.
• When fully charged, the battery indicator lights will remain on.
• After 10 seconds of no operation during charging, the display will
automatically turn off.
The device must not be used during charging.
After using a long press to turn the device on, the charging port (4) can supply
power to charge other electronic devices via the USB output. (5V/1.5A max).
The device will shut down if the battery becomes too low or when the battery
is fully charged.
POWER ON/OFF
Press the Power button (long press) to
turn the device on.
Press the Power button (long press of
3 seconds) to turn the device off.
• The progress bar will move across
the screen to the point of start-up.
• The USB port can now supply
power to charge another
electrical device.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6