Zanussi ZBB 6286 Instructieboekje - Pagina 13

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZBB 6286. Zanussi ZBB 6286 32 pagina's. Zanussi washer dryer brochure
Ook voor Zanussi ZBB 6286: Specificatie (5 pagina's), Instructieboekje (20 pagina's), Specificaties (7 pagina's)

Pagina afdrukken

From the plastic cover (E), which is used to cover the

hinge with the pivot pin, you must take away the part

as indicated in the drawing.

This operation is made easer since there is, in the

internal part of the cover hinge lid a groove that

facilates the removal of this coomponent.

"Remove the part marked with DX, if the pivot pin is

inserted in the right hinge, SX in opposite case."

Apply covers (C-D) on joint cover lugs and into hinge

holes.

Snap vent grille (B) and hinge covers (E) into

position.

Separate parts Ha, Hb, Hc, Hd as shown in the

figure.

Place guide (Ha) on the inside part of the furniture

door, up and down as shown in the figure and mark

the position of external holes. After having drilled

holes, fix the guide with the screws supplied.

Fix cover (Hc) on guide (Ha) until it clips into place

PR266

ca. 50 mm

90°

ca. 50 mm

PR33