Zanussi ZI 9321 T Instructieboekje - Pagina 12
Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZI 9321 T. Zanussi ZI 9321 T 14 pagina's.
Pagina afdrukken
Place guide (A) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes. After having drilled
holes, fix the guide with the screws supplied.
Fix cover (C) on guide (A) until it clips into place.
Open the appliance door and the furniture door at
90°. Insert the small square (B) into guide (A). Put
together the appliance door and the furniture door
and mark the holes as indicated in the figure.
Remove the squares and drill holes with ø 2 mm at
8 mm from the outer edge of the door. Place the
small square on the guide again and fix it with the
screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
12
A
PR166
A
C
PR33
8mm
A
B
PR167
PR168
D040
SWITCH
O
17