Zanussi ZPL 4230 Instructieboekje - Pagina 6

Blader online of download pdf Instructieboekje voor {categorie_naam} Zanussi ZPL 4230. Zanussi ZPL 4230 10 pagina's.

Fitting the front panel (Fig. 4)

The overall dimensions of the covering front panel

should be 1-2 mm smaller than those of the door, and

the thickness should not exceed 4 mm.

With the refrigerator door closed, release the self-

tapping screws securing the removable side of the

door frame.

Take off this removable side and slide in the

covering panel after slackening the remaining

screws around the door frame.

Push the covering panel all the way in, then re-

fasten the frame to the door, reﬁtting the previously

removed door frame side.

D149

Air ﬂows through the ventilation slits in the lower

part of the frame.

To ensure proper air circulation, though, a

«chimney» has to be provided at the back of the

cabinet: it should be at least 50 mm deep and

540 mm wide (Fig. 5).

The ventilation opening must also be maintained

between the upper part (top) of the cabinet and the

ceiling.

Air must be able to circulate freely through the

system.

Fig. 4

D252

Fit the appliance into the recess, positioning it in

the centre.

Using the four screws supplied with the appliance,

secure the four angle brackets of the appliance

cabinet to the recess unit.

Fig. 5

1446